|
Jewell Industries, Inc. uses quality Roppe Vinyl tile for projects that demand the highest quality results and require a unique look. Roppe Luxury Vinyl Tile is constructed from high quality vinyl
components laminated under heat and pressure. Wood and Terra Naturals encompass an array of wood grains, marbles, granites, and stones with color variations to fit most design challenges.
Sizes currently offered are 3" x 36" planks and 18" x 18" and 12" x 12" tiles. Planks and tiles are offered as either beveled or straight edge. Roppe North Coast
Collection Luxury Vinyl Tile meets federal specification SS-T-312 Type III Vinyl, meets all requirements for ASTM F1700-96, rated Class I: E-648 Radiant Panel Test Roppe Luxury Vinyl Tile.
Roppe North Coast Luxury Vinyl Tile Collection is designed for use in commercial and residential applications. The Wood Naturals line in this collection features a
natural wood look. North Coast Terra Naturals feature marble, granite, and stone looks. Roppe Luxury Vinyl Tile is laminated PVC specifically formulated for
durability, ease of maintenance, and UV stability to retard fading or yellowing. An embossed surface enhances the rich look of wood, while adding slip resistant
qualities to the tile. Precision cutting allows for easy installation. The natural look of woods, marbles, granite and stone with the North Coast Collection features prolonged durability of vinyl.
GAUGE (Thickness): .125" (1/8") (.375mm)
SIZES: 3" x 36" planks and 18" x 18" squares (Wood Naturals), 12" x 12" and 18" x 18" squares (Terra Naturals).
STYLES & COLORS: Wood Naturals is available in 4 patterns (Cherry, Walnut, Maple, and Oak) with several color options. Terra Naturals is available in 12
patterns, including stones, marbles, and granites in various colors.
LIMITATIONS: Only Roppe #375 Luxury Vinyl Tile Adhesive should be used to apply Roppe Luxury Vinyl Tile.
TECHNICAL DATA
For additional technical information see http://www.roppe.com
RUBBER COVE BASE
Rubber Cove Base is designed for use in commercial and residential wall base applications. This Rubber Cove Base is a vulcanized extruded product,
manufactured from a synthetic rubber compound specifically formulated for durability, flexibility and stability. Base features a ribbed back and exclusive
top-lip design for tight fit. This product is a low-gloss, satin (matte) finish that resists scuffing, gouging and most chemicals. It comes in 39 colors. Twenty-eight
of these are part of the Roppe Matchmates Color System. Available in 48" lengths and 120' continuous rolls: 2-1/2", 4" & 6" heights.
GAUGE: .125" (1/8")
LIMITATIONS: Only Roppe #205 Cove Base Adhesive should be used to apply Roppe Rubber Cove Base. Do not apply over vinyl wall covering or epoxy paint.
Heavy sunlight penetration from direct or glass-filtered sources may cause fading. All purpose cleaners/disinfectants allowed to dry on the base may cause staining.
During routine floor maintenance, cleansers with acids may stain base. Base should be wiped off with a soft cloth or sponge moistened with clean water.
RUBBER TILE
Roppe Raised Design Rubber Floor Tile is designed for interior use in high traffic
areas. Typical applications include terminals, malls, schools, recreational facilities, public buildings, department stores, elevators, lobbies and ramps. It may be used
on floors, walls, or other surfaces. Roppe Low Profile Raised Circular Design Tile is recommended for areas where light wheel traffic such as shopping carts, luggage carriers, and dollies are a factor.
Roppe Raised Design Floor Tile is 100% synthetic rubber blended with stabilizing fillers, color pigments, extenders, and processing oils. This tile is non-conductive
and resists scuffing, gouging, cigarette scorching, and most chemicals and common substances. Pattern and color is inherent throughout the tile. The raised
design allows dirt and liquids to drain off, reducing the chances of slippage. The cushioning effect of the rubber tile reduces noise. Available in 33 colors.
Twenty-eight of these are part of the MatchMates Colors System.
LIMITATIONS: Exterior use is not recommended. Heavy sunlight penetration from direct or glass-filtered sources may cause fading.
RUBBER STAIR TREADS
Roppe Abrasive Strip Treads meet the requirements of Title 24, Section 3306(r) of the Disabled Access Regulations for the State of California pertaining to stair
treads designed to accommodate the visually impaired. And, a color-contrasting strip can be added to meet some state requirements for the visually impaired. Our
Abrasive Strip Treads come with the abrasive strips as a standard, not special order. Abrasive strips can be installed on all our rubber stair treads, except Rib Design or 1/8" Smooth.
One 2" strip or two 3/4" strips in your choice of six colors (safety yellow, pebble white, teak brown, galley red, ocean gray, black, beige, and glow strip) is
recessed into the tread. Our newest tread feature – self-illuminating, photoluminescent abrasive strips – aren't just visible in light, but glow in the dark
for added safety in emergency situations. Roppe Stair Treads and accessories are designed for use on all interior stairs, including pan-filled concrete steps and
wooden steps. Superior wear resistance makes Roppe Stair Treads ideal for high traffic areas including terminals, malls, schools, recreational facilities, public
buildings, and department stores. Roppe Raised Design, Standard, and Heavy Duty Rubber Stair Treads are molded of 100% synthetic rubber blended with stabilizing
fillers, color pigments, extenders, and processing oils. Available in 33 colors, twenty-eight of these are part of the Roppe Matchmates System
Roppe Rubber Treads meet all U.S. Industry Standards, including:
Federal Specification R-T-650C
Title 24, Section 3306(r) of Disabled Access Regulations of the State of California
Roppe Stair Treads are non-conductive and resist scuffing, gouging, cigarette
scorching, and most chemicals and common substances. Roppe Stair Treads cushion footsteps, reduce noise, and help prevent slipping. Pattern and color are inherent throughout the thickness of the tread.
LIMITATIONS:
For interior use only. Roppe #319 Stair Tread Adhesive and Roppe ECC Epoxy Nose Filler must be used for the Roppe Warranty to apply.
ROPPE RAISED DESIGN RUBBER TREAD  Available in Low Profile Raised Circular Design, Standard Profile Raised Circular Design, Raised Square Design, and Vantage Profile Raised Circular Design
Tread with Riser. Matching Risers and Stringers are also available.
Roppe Designers Choice Rubber Floor Tile is designed for interior use in high traffic areas. Typical applications include
terminals, malls, schools, recreational facilities, public buildings, department stores, elevators, lobbies and ramps. It may be used on floors, walls, or other surfaces. Roppe Designers Choice Floor
Tile is 100% synthetic rubber blended with stabilizing fillers, color pigments, extenders, and processing oils. This rubber tile is non-conductive and resists scuffing, gouging, cigarette scorching, and most
chemicals and common substances. Pattern and color is inherent throughout the tile. The raised design allows dirt and liquids to drain off, reducing the chances of
slippage. The cushioning effect of the rubber tile reduces noise. Currently available in 33 colors, twenty-eight of these are part of the MatchMates Colors System.
LIMITATIONS:
Exterior use is not recommended.
Heavy sunlight penetration from direct or glass-filtered sources may cause fading.
|
